All guides Tile Grouting

Epoxy grout vs cement grout: which is right for your floors and bathrooms?

Why cement grout turns black, cracks and lets water through, how epoxy grout differs, and where re-grouting with epoxy is worth it in a Bangalore home.

Epoxy grout vs cement grout: which is right for your floors and bathrooms?

The lines between your tiles are called grout joints, and they do more work than they look. They lock tiles in place, stop dirt collecting in the gaps, and are the first barrier against water getting under the floor. In most Indian homes those joints are filled with cement grout. It is cheap and quick to lay, but it is also the reason so many bathroom and kitchen floors look dirty even right after cleaning.

What goes wrong with cement grout

Cement grout is made of cement, fine sand and pigment. Once it sets it is hard, but it is also porous: full of tiny pores that absorb water and dirt.

  • It turns black. Moisture sits in the pores, and mould grows in the joints. No amount of scrubbing reaches mould that is inside the grout rather than on it.
  • It stains. Oil, tea, turmeric and floor-cleaner residue soak in and stay.
  • It cracks and crumbles. Tiles and slabs move slightly with temperature and load. Rigid cement grout cracks, and cracked grout crumbles out of the joint over time.
  • It lets water through. In a bathroom, every cracked joint is a path for water into the bed below the tiles. That is one of the most common causes of bathroom leakage into the next room.

What epoxy grout is

Epoxy grout is a two-part material: a resin and a hardener mixed together just before use. It sets through a chemical reaction rather than by drying, and the result is non-porous.

In practice that means:

  • Water doesn’t soak in, so the joint itself stops being a leak path.
  • Stains stay on the surface and wipe off, instead of soaking into the joint.
  • Mould has nowhere to grow, because there is no damp pore space for it.
  • It bonds strongly to the tile edges and doesn’t crumble out the way old cement grout does.

The trade-offs

Epoxy grout is harder to work with. It has to be mixed in exact ratios, sets quickly, and must be cleaned off the tile face before it hardens, or it leaves a haze that is very difficult to remove. This is a job where workmanship matters as much as the material. The most important step is removing the old grout properly first. Epoxy pressed into a shallow or dusty joint over the remains of crumbling cement grout will not last.

Where epoxy is worth it

  • Bathrooms and wet areas: the biggest gain, because it stops joint leakage as well as blackening.
  • Kitchen floors and counters: where oil and food stains ruin cement joints.
  • Balconies and utility areas that get washed often or catch rain.
  • High-traffic floors in shops, offices and common areas, where appearance matters and floors are mopped daily.

Can it be done without removing tiles?

Yes, in most cases. If the tiles themselves are sound and well bonded, the old grout can be cut out of the joints with the right tools, the joints cleaned, and epoxy grout pressed in. The tiles stay where they are. If tiles are hollow-sounding, cracked or loose, those need to be reset first.

Joints gone black or leaking? See how Ultra Max cuts out the old grout and seals the joints on our tile epoxy grouting page.

Talk to Ultra Max

We inspect first, then give you one clear plan. Serving homes and businesses across Bengaluru.

See tile epoxy grouting